Electrolux 5303935068-ER Range Flat Gas Igniter

The Electrolux 5303935068-ER Range Flat Gas Igniter Hot Surface OEM is a factory-approved replacement part for various Electrolux gas ranges. It serves as the ignition source for the burner in your gas oven, ensuring that the gas ignites and heats efficiently. As a critical component of the oven’s heating system, the igniter heats up to the point where it can ignite the gas that fuels the stove, thus allowing the appliance to function correctly.

This specific part—OEM stands for Original Equipment Manufacturer—indicates that it is manufactured by Electrolux, ensuring that the part meets the high standards of quality and reliability expected from the brand.

How the Electrolux 5303935068-ER Gas Igniter Works?

A flat gas igniter operates by utilizing electricity to heat up a surface (typically ceramic or metal) to the point where it reaches ignition temperature. The hot surface igniter, once sufficiently heated, causes the gas to ignite, producing the flame required to heat the oven. In this system:

• Voltage passes through the igniter – When you turn on your gas range, a signal is sent to the igniter, prompting it to heat up.
• Gas is released – As the igniter heats up, it simultaneously triggers the gas valve to open, allowing the gas to flow into the burner.
• Ignition occurs – Once the gas comes into contact with the hot igniter, it ignites, creating a flame that will heat the oven.

The Electrolux 5303935068-ER igniter is designed to heat up quickly and operate efficiently, allowing your oven to reach the desired temperature as fast as possible. A faulty igniter can lead to poor heating performance or even a complete inability to ignite the gas in the oven.

Common Signs of a Failing Igniter

Over time, igniters can wear out due to continuous exposure to high temperatures and usage cycles. Here are some common symptoms that indicate your igniter may need replacement:

The oven fails to heat up

One of the most obvious signs of an igniter failure is when the oven does not reach the set temperature or fails to heat up at all. This could indicate that the igniter is not getting hot enough to ignite the gas.

A delay in ignition

If your oven takes a significantly longer time to ignite than usual, this could signal that the igniter is weakening and may not be producing enough heat.

Clicking sounds but no ignition

If you hear a clicking sound when you turn on the oven but the burner does not light, the igniter could be defective or not functioning at full capacity.

Visible damage to the igniter

Sometimes, visual inspection can reveal cracks or damage to the igniter surface. If the igniter appears damaged, it needs replacement.

The oven turns off intermittently

A malfunctioning igniter can cause the oven to turn off randomly, as it may fail to maintain the flame once ignited.

Why Choosing OEM Matters?

Choosing an OEM (Original Equipment Manufacturer) part like the Electrolux 5303935068-ER Gas Igniter is essential for ensuring compatibility and longevity. OEM parts are specifically designed to work seamlessly with your appliance, reducing the risk of operational issues. Non-OEM or generic parts may not provide the same level of performance or longevity, potentially leading to additional repairs down the line.

Where to Purchase the Electrolux 5303935068-ER Gas Igniter?

You can purchase the Electrolux 5303935068-ER Range Flat Gas Igniter Hot Surface OEM from a variety of online retailers, including appliance parts stores, like Parts Of America. When purchasing, ensure you’re buying from a reputable source to avoid counterfeit products.

Conclusion

The Electrolux 5303935068-ER Range Flat Gas Igniter Hot Surface OEM is a reliable and essential component of your gas range. When your oven stops working correctly, the igniter is one of the first things you should check. By understanding how it works and knowing how to replace it, you can save yourself time and the cost of hiring a technician.

Maintaining a fully functional igniter ensures that your gas oven will work safely and efficiently, providing you with years of dependable service. With this guide, you now have a comprehensive understanding of how the Electrolux 5303935068-ER igniter operates and what to do when it malfunctions.

FAQs About Electrolux 5303935068-ER Range Flat Gas Igniter

What is the Electrolux 5303935068-ER Gas Igniter?

It is a hot surface igniter used in gas ovens and ranges to ignite the gas and produce heat.

How does the Electrolux 5303935068-ER igniter work?

The igniter heats up and ignites the gas, allowing the oven to produce heat.

Why is my oven not heating properly?

A faulty igniter is one of the most common reasons for an oven failing to heat.

Can I replace the igniter myself?

Yes, with the right tools and precautions, replacing the igniter is a relatively simple task.

What tools do I need to replace the Electrolux 5303935068-ER igniter?

You will need a screwdriver, socket wrench, and safety gloves.

How long does an oven igniter last?

Igniters typically last for 3 to 5 years, depending on usage and maintenance.

What are the signs that my igniter needs replacement?

Delayed ignition, no heat, clicking sounds, and intermittent heating are common signs of a failing igniter.

Where is the igniter located in the oven?

The igniter is usually located near the burner assembly at the bottom of the oven.

Is the Electrolux 5303935068-ER an OEM part?

Yes, it is an Original Equipment Manufacturer part, ensuring compatibility with Electrolux ranges.

What happens if I don’t replace a faulty igniter?

If the igniter is faulty, the oven may not heat at all, or it could result in inefficient heating.

Can a faulty igniter cause a gas leak?

Not directly, but if the igniter fails to ignite the gas, you may notice a gas smell. Always turn off the gas supply if this occurs.

Do I need to turn off the gas when replacing the igniter?

Yes, it’s crucial to turn off both the gas supply and unplug the oven before replacing the igniter.

How long does it take to replace an oven igniter?

Replacing an igniter usually takes about 30 to 45 minutes.

Why choose an OEM igniter over a generic replacement?

OEM igniters are designed to meet the specific requirements of your oven, ensuring proper functionality and longevity.

What causes an igniter to fail?

Constant exposure to high temperatures and normal wear and tear can cause an igniter to fail over time.

Can I clean a dirty igniter?

Igniters are delicate and should not be cleaned with abrasive materials. If dirty, it is better to replace it.

How much does it cost to replace an oven igniter?

The cost of the part varies, but DIY replacement can be done for under $100, including the cost of the igniter.

What should I do if my oven igniter sparks but won’t ignite?

Check the gas valve and ensure that gas is flowing properly. If everything else seems fine, the igniter may still be the issue.

Can I test an igniter before replacing it?

Yes, using a multimeter to check for continuity can help you determine if the igniter is functioning.

Where can I buy a genuine Electrolux 5303935068-ER igniter?

Genuine parts can be purchased from Electrolux’s official website, authorized retailers, or local appliance parts stores.